V-Series Contura V Switch 2-Pole 24VDC On/Off/On

VJBAS00B-GZC

Quick Overview

Following the success of the original Contura II and III series, the Contura V (five) version was released in 2004. Featuring a symmetrically sculptured design and a combination of fine and polished surfaces the Contura V has become a popular choice for both vessel and vehicle applications.

Add to Compare

General

SeriesV-Series
RangeContura V
Actuator StyleRocker
Number of Poles2
ConfigurationOn/Off/On
Rating15 Amps
Voltage24 VDC
IndicatorNo

Electrical

Contact Rating15 Amps, 15-28 VDC
Dielectric Strength1500 Volts RMS
Insulation Resistance50 Megohms
Initial Contact Resistance10 milliohms max. @ 4 VDC
Life50,000 - 100,000 cycles circuit dependent
ContactsSilver alloy, silver tin-oxide, fine silver.
TerminalsBrass or copper/silver plate 1/4” (6.35mm) Quick Connect terminations standard.

Mechanical

Endurance150,000 cycles minimum circuit dependent

Physical

IlluminationIncandescent – rated 10,000 hours (standard); Neon - rated 25,000 hours; LED – rated 100,000 hours 1/2 life (optional) (LED is internally ballasted for voltages to 24 VDC).
SealsInternal sealed version (standard). Optional external gasket panel seal (VPS).
BasePolyester blend rated to 125C with a UL flammability rating of 94 V-O.
Actuator - Hard Surface (standard)Basic actuator structure moulded of thermoplastic polycarbonate with a hard Nylon 66 thermoplastic surface overlay.
Actuator - Soft Surface (optional)Basic actuator structure moulded of thermoplastic polycarbonate with an elastomer overlay (Contura II and III only).

Environmental

EnvironmentalSealed version: IP68, in accordance with IEC 529, BS 5490, DIN 400 50 & NFC 20 010. This rating applies to front panel components and signifies protection against dust and the prolonged effects of immersion under pressure. The standard test for immersion under pressure requires submersion under one metre of water for 30 minutes. The V-Series switch has exceeded these parameters, having been actuated and illuminated during submersion. NOTE: Sealed switch with optional panel gasket will meet IP67 rating.
Operating Temperature-40 C to + 85 C
Salt SprayPer Mil-Std 202F, Method 101D, Test Condition A, 48 Hrs. Sealed version only.
DustPer Mil-Std 810C, Method 510.2 Air Velocity 300 ±200 Feet/Min, Test Duration 16 Hrs.
Thermal ShockPer Mil-Std 202F, Method 107F, Test Condition A, -55C to 85C. Test criteria – pre and post test contact resistance.
Moisture ResistancePer Mil-Std 202F, Method 106F, Test Criteria – pre and post test contact resistance.
Ignition ProtectionAll Contura switches with sealed construction (standard) meet the requirements of UL1500/ISO8846 for ignition protection, in addition to compliance with EC directive 94/25/EC for marine products.

Following the success of the original Contura II and III series, the Contura V (five) version was released in 2004. Featuring a symmetrically sculptured design and a combination of fine and polished surfaces the Contura V has become a popular choice for both vessel and vehicle applications. Like the originals, the Contura V feature the same mounting, terminals, illumination and switching configurations.