Input
| Input Voltage | 115V / 230V (+/- 15%) Auto Switch |
|---|
| Frequency | 50Hz / 60Hz (+/-10%) |
|---|
| Cos | > 0.9 typ |
|---|
| Efficiency | 0.87 |
|---|
| Max. Current 115V/230V | 14A / 6A |
|---|
| Fuse (6,3x32mm) | T20A |
|---|
Output
| Number of outputs | 3 isolated outputs |
|---|
| Number of charging curves | 9 programs, position selected by dip switch 00-Liquid Lead Acid batteries (open) 01-Sealed Lead batteries 02-Lead Calcium batteries 03- Delphi batteries 04- Optima/Maxima batteries 05-Winterizing 06-Batteries Gel&AGM 07-Power supply 08-LiFeSo4 batteries |
|---|
| Charging curve | I.U.U.o |
|---|
| Voltage share | +/-2% |
|---|
| Ripple | < 1% (BW < 20MHz) |
|---|
| Fuse (auto mini) | 3 x F25A |
|---|
Physical
| Display | Multi-colour Touchview |
|---|
| Operating Temp | -10°C to +50°C |
|---|
| Humidity | 10% to 95% (without condensation) |
|---|
| IP | IP22 |
|---|
| Ventilation | Forced fan adjustable speed cooling |
|---|
| Safety | EN 60335-1 |
|---|
| EMC | EN 55016, IEC 61000 |
|---|
| Housing | White powder coated aluminium |
|---|
| Mounting | Wall mounted 4 x M4 screws |
|---|
| Dimensions | 346 x 358 x 128 mm |
|---|
| Weight | 6 Kg |
|---|
| AC Connection | 3-point cage terminal 10mm² max |
|---|
| DC Terminal | 4 M8 terminals |
|---|
| Output alarm contact | 1A 30V NO |
|---|
Optional connections
| Battery temperature sensor | 2-point cage 1,5 mm² terminal |
|---|
| External touch screen control panel (touchview) | RJ45 |
|---|
| CAN Bus connection | 2 Micro-Fit & RJ11 |
|---|
Protection
| Output surge | “Current limited” type |
|---|
| Output short circuit | “Shutdown” type with automatic restart once the fault has disappeared |
|---|
| Excessive output voltage | “Shutdown” type with automatic restart once the fault has disappeared |
|---|
| Battery polarity reversal | Output fuse |
|---|
| Excessive internal temperature | “Shutdown” type with automatic restart once the fault has disappeared |
|---|
| AC over and under voltage | “Shutdown” type with automatic restart once the fault has disappeared |
|---|
- Can operate up to 50°C without de-rating
- Internal diode isolator without voltage drop
- User friendly design : a solid casing in aluminium, mounting by 4 easily accessible screws
- A front cover allowing easy access to the charge selector and the wiring connections (4 solid M8 terminals for the battery outputs)
- A cable gland for the input cable and a cable grommet with a waterproof seal
- Integrated Control Panel : LED display indicating the charging curve (boost, absorption, floating), as well as anomalies and faults (temperature, voltage, fuses…)
- Automatic switch over : equipped with 3 isolated outputs, automatic switch over 115V / 230V, 50Hz / 60Hz
- 9 charging programs (including 2 winterization and 1 power supply) depending on battery type, makes this charger suitable for all charging needs
- Optional extras : external touch screen control panel Touchview and a battery temperature sensor allowing a charging level adjustment
- Conformal coating of the PCB to prolong the life of the battery charger
- Using built-in CAN BUS J1939 interface, the Dolphin Pro can be connected to any monitoring system
